Good evening everyone!!
I am a student engineer, I need your help, I have a project to size a service station, but I don't know how to size the petrol pumps, how to model them at the level of caneco-bt, by an engine or I have to add another block?? and I have no idea about the consumption on these pumps even I searched on the internet, if qlq has any information please inform me!!
Thank you very much
Hello
I think that we need to go into more detail about each of the questions and ask several questions, because this is too general!
Yes, we don't really understand what the question is.
Modeling: in 3D/2D? in synoptics?
Sizing: electricity consumption? Throughput / flow?
We would need more details on the expected result to try to answer.
Hello
You need more detail, I have a project to power a service station (outdoor trimming, rest, café, ... all the station services and also the pumps by the solar panels, to do this we have to determine the need for electrical energy, I was able to determine the power that the pumps consume on 6 gas pumps in this station!! For you, what do I have to do to complete this work!! !?
if you have any details let me know, thank you very much for your help
Hello
Well, personally, electricity is not my strong suit so no real information to bring.
One remark however, just on the "pumps", there is indeed the fuel flow but also the suction of the vapors in parallel. So, an extra engine.
The interfaces also need to be fed continuously. So, with solar panels, do you have enough storage capacity to spend the night. Especially since if there is a restaurant or café, there are certainly fridges that don't stop at night either.
Here. I don't know if it can be useful. Even if we see a little more clearly, it's still vast.
Thank you Chamade for your answer, you mention that we will need additional engines for parallel vapor suctions, please more information on that??
If you speak English, there is information here:
https://en.wikipedia.org/wiki/Fuel_dispenser#Design
See also:
https://www.google.com/search?q=Fuel+dispenser+drawing%7Ccad&biw=869&bih=557&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwiH1PnQ54vMAhWIQBoKHSKTC6QQsAQIGw
http://www.bibliocad.com/library/jet--petrol-pump_29811
http://www.bibliocad.com/library/pumping-station_33459
http://www.bibliocad.com/library/service-station--project_30846
But as I said at the beginning, you have to ask specific questions!
We can't do the project for you, but if you want you can ask 10 or 20 or even 50 questions about Lynkoa, we'll try to answer them, but without precision, we can't do anything!
Good luck!
See also:
https://3dwarehouse.sketchup.com/search.html?q=tag%3A%22fuel%20station%22&scoring=m
http://tf3dm.com/3d-model/gas-station-76372.html
https://3dwarehouse.sketchup.com/search.html?q=tag%3A%22Fuel%20pump%22&scoring=m
https://3dwarehouse.sketchup.com/search.html?q=tag%3A%22gas%20pump%22&scoring=m
http://www.turbosquid.com/search/index.cfm?keyword=gas&sort_column=a5&sort_order=asc
http://www.turbosquid.com/3d-models/free-gas-station-3d-model/787999