Unfolded state that doesn't work

3D Design Volume Model
1

Hello

Best wishes for 2015

Here I have a sheet metal piece, which unfolds in the model but not in the plan, why, mystery.

I tried a lot of things, erased the MEP, restarted SW..., but nothing helped.

If you have an idea thank you

Attached is the document


tole_de_depression.sldprt
2

Check the configuration of your unfolded state.

The unfolded one is deleted in the unfolded config.

1 Like
3

Hello Frédéric

How do you do it?

Thank you

 

4

Hello

edit your "DefaultSM-FLAT-PATTERN" config and in the build tree, you have to activate the unfolded. You must have deleted it by mistake.

2 Likes
5

right-click on the unfolded state function and then unchecked the delete state for the FLAT-PATERN config


sans_titre.png
6

Hello Flop1

No way I don't understand

 

7

I configured your function. Try your plan with it!


tol34b1.sldprt
1 Like
8

rather than long explanations...


sans_nom.png
2 Likes
9

I did what you tell me but the box is checked again after

 

10

C good Fred and Flop1

Thank you both

11

Small precision, be careful.

If you delete your unfold state again in your part. (to be able to work with the folded state).

Does your drawing stay unfolded? because I the room folds up.

I had to create a new configuration and my unfolded state view remains  unfolded.

 

12

It's good for me.

Indeed, the unfolded state must be activated in the derived configuration.

and then you can work with the main setup.

Good night.