Hello I would like to know if it is possible to create sheet metal development plans at scale 1 (for cutting)
and that this plan take the name of the welded part part (multibody parts file)
Hello
Yes, you have a utility from the myCADtools suite that does this. It's called "SmartDrawings."
Kind regards
smartdrawings.jpg
2 Likes
Hello
first of all you have to develop your development on the 3D after drawing at 1:1 scale and then exporting to the format. Dxf after for the name normally it will follow your name of parts develop so no worries about it there.
Kind regards
Bastien
Hello
Much simpler, once the sheet metal is made in 3D, have it saved in DXF format and there it will automatically save the unfold, you can even choose if you want to keep the fold lines, the interior cut lines, ...
In this case, the dxf takes the name of the sheet metal part.
@+
6 Likes
not much to add everything is said in the previous posts
@+
Hello
Even if you make an empty plane (without a cartridge) and integrate the press with a scale 1, it works. When saving in DXF, the reference will appear as the file name.
Hello
Otherwise if it's for unfolded 2D planes, it's possible to activate the 1:1 scale at the recording.
To do this, you have to select the DXF format then click on option and finally Enable 1:1 scale.
Good luck
capture.jpg
1 Like
Question solved