Links custom property to text in a drawing

Out of category
1

How do I add a text in a drawing file that is directly associated with the thickness of my part? My parts already has custom property connected to this rating. as in the following example

 

Thank you!


captgfgdfur33e.jpg
2

Hello 

Would you like your cartridge to display the thickness of your part?? Do you have a custom property of the thickness? If this is the case, you just have to put the cursor in this property and then click on the part so that the dimension of the thickness appears and click on it so that it will be linked to the custom property.

1 Like
3

See example of an attachment in SW 2016 that links the engraving and dimensions to the cartridge. If you change the dimensions everything will follow...  


tu_o_-_3_avec_degaufrage.sldprt
1 Like
4

You need to create a custom property of your thickness rating.

Then you will look for this property in your drawing.

2 Likes
5

The image below to put a rating in ownership:

In Value, just click on the thickness dimension.

2 Likes
6

And below to recover the property with Link to Property

1 Like
7

As a result, after the text EP:, I added the "THICKNESS" property which returns '10'

2 Likes