Hello
Can we display an isometric grid (magnetic or not) to make 3D sketches more easily, thank you.
Slts
1 Like
See this tutorial
https://www.youtube.com/watch?v=azVB6Cs2_4E
@+ ;-)
2 Likes
Hello
The grid won't be of much use to you, make plans to lean on it if necessary.
Here's a little video to help you make 3D sketches easier.
2017-01-26_at_13-48-13.mp4
1 Like
Hello
Unfortunately, this is not possible in 3D sketching.
You can display a grid only in 2D sketch by option / Document Property / Snap Grid / Show Grid
3 Likes
via the previous link here's what you can do
To do this, you created your first top-down grid
with some supporting refs
The other grids are only repetitions of the first one for your levels
@+
Thank you
for your answers.
1 Like
if an answer solved your problem
click a resolved on the said answer
This will close the question
Thank you
@+ ;-)
To constrain your paths, use planes, axes and make construction lines, You can constrain a segment according to a direction (XYZ) give it a position (on an XY plane), an orientation according to a construction line (angles dimensioned according to a construction line).
1 Like
@ leblanc did you look at my link in first reply
you create your grid from above with sketch lines in X that you define yourself
so space of 1 meter if we want for example that you repeat X times
ditto in perpendicular Y
so you have your basic sketch with your X and Y every meter
This said sketch you repeat it in the z-axis in height every meter you want
you end up with a 3D grid with a line interval in X Y Z of 1 meter
After that, via each level, nothing could be easier, sideways, linears, angles, etc.....
it seems simple and elementary to me
It is an acriquer technique for the building industry
@+ ;-)
Hello
No possibility in automatic, you have to create your grid, something I didn't want to do too bad.
Slts