Hello
For a drawing, I have configured, for a component (sectional view), that my hatching is in one direction but they remain inclined in another direction. I would also like to point out that the "Auto Hatching" box on my cut line is disabled.
You can see on the screen that the component with the "dissident" hatching cut the lines of my screw.
Has anyone ever encountered this problem?
EDIT: This is Solidworks 2016
Hello
I just did the test and indeed I can choose the inclination or a different one it changes nothing unless you check plain or none.
Personally I use hatching of the material, but suddenly all the parts have the same alignment. (it must be a single "hatched sheet" with the parts that serve as a filter in fact, at least that's the impression I have)
Hello
I have another MEP with a fairly similar part and yet I don't have this hatching problem.
Would Solidworks do as it pleases?
Don't forget to give your version of SW too^^ in my case is under 2019
So today my problem was almost solved, I was at least able to put my hatching in the desired direction. Indeed, yesterday I selected hatching "Apply to: component" nothing helped, then "Apply to: view" the same. But now I have re-selected "Apply to: component" and everything is back to normal. Except that it only worked once, now when I want to change the direction of my hatching, it doesn't work anymore.