Part Configuration Indication in BOM

Out of category
1

Hello everyone.

I would like to know if it is possible in an assembly BOM containing configured parts,

automatically indicated in the table under which configuration the part is located.

Because in my assembly it happens that I have several flanges from the same file but in deferential configurations.

So I would like to be able to spot them on my plan separately.

Thank you in advance.

Good end of the afternoon.

 

2

Hello

 

It seems to me that it is in the corner framed in red (see attachments).


sans_titre.png
3 Likes
3

Yes, just add a column with the custom property: configuration name.

 

View image


config.png
4 Likes
4

Not @Fred, this box is used to group or not the parts with the same name or the same configuration.

 

If I understood correctly, it wants to display the name of its respective configuration per room.

 

As shown in my picture;)

1 Like
5

You still have to select the right box otherwise there will only be one line for a room with several configurations.

 

But it's true that my answer is not complete at all:(

2 Likes
6

I admit that if the boxes @Fred are talking about are wrongly ticked, it won't work.

 

we complement each other Fred ;) =)

2 Likes
7

Thank you guys, it's  good for me now.

8

Hello gentlemen,

 

To avoid duplication and as my question is very similar to this one, I take the liberty of digging up this post:)

 

I have an angle iron with 4 different lengths:

CL1: 500mm

CL2: 600mm

CL3: 700mm

CL4: 800mm

I would like in my drawing, to reference my 4 configs and put for example in the column next to it its automatic length.

All this to avoid the risk of entering the lengths by hand in each box....

 

Thank you