Hello @tous,
I am having a problem with the refresh of the auxiliary view following a resizing of the room,
Is there a way to remedy it without having to redo the view?
Thanks in advance,
Hello
Right-click on the view and then edit sketch. The circle of the detail view can be constrained to drilling or other landmarks on the view.
Hello @soring ,
In fact the problem is in the "AJ" view which is no longer projected correctly (I attach the capture for better visibility).
vue_auxiliaire.png
vue_auxiliaire_02.png
Sorry, I had read half
So maybe this solution seems to work. Right-click on the AJ view and then check turn around the ground. For me it's being updated.
It didn't work :(
oops at home neither. It's not the right track.
When I create the auxiliary view, I select it as the reference edge. The projection updates without further action
Then for the rotation of the view, I use counterclockwise alignment.
1 Like
Hello@soring
Yes it's pretty much the same procedure I followed except for the rotation which is defined in the document properties, the problem seems to me that the perpendicularity relation (direction of view) and this edge which is lost, and unlike an auxiliary view on sketch I can't find a way to edit this edge constraint.
1 Like
Thanks for the trick of adjusting the rotation by the settings. It reduces the number of manipulations.
Nevertheless, there are bugs. I don't have the one of loss of perpendicularity but the axes of the center of the holes are completely messed up. The detail views on the view to the who turned the same.
About axis rotation, there is a checkbox, I don't remember where it is, I'll check as soon as I access solidworks,
It might be uncheck for the basic view,
1 Like
It's well ticked. No big deal this bug, I rarely use the auxiliary view.