Modify some model

Other sections CAM
1

Hello everyone,

 I want to edit some design like the following screenshot!

1 Like
2

If I understood your question correctly, you just have to go to the "function" of the leave and other (right click: edit the function) that you have circled in your screenshot. It's in the tree on the left in the window; Does that answer your question or am I missing the point?

1 Like
3

What exactly do you want to change

because there you have a projected sketch that delimits your removal of material 

So if you want to modify your material removal just go to the sketch and modify the profile of it

If you have any other info on your request, we're all ears

@+;-))

1 Like
4

I want to find a tool that can render linesets like a splice... For example, in this capture during laser cutting, I get the part exactly like the sketch, knowing that you have to have a spline in some drawing

1 Like
5

Solidworks is a parametric log, so who says parametric, says dimensioning, a spline is not easy to quote

I make all the curves in straight lines 

I enlarge my drawing a lot to see the pixelation and I make sure to draw lines on the axis of these said pixels so I end up with a maximum of lines but rendered at the normal scale to the eye you can't see anything at all

 

@+;-))

1 Like
6

See this tutorial

http://www.lynkoa.com/tutos/3d/tuto-creation-d-un-model-l-aide-d-une-image

@+;-))

7

in Autocad there is a solution to display the lines well this is called "REGEN" please see the following pictures (before and after entering the function)

 

 

 

I want to have something similar on Solidworks! because sometimes the hole is displayed as a hexagon shape almost, and it causes me a big problem

8

See this comm thread

http://www.lynkoa.com/forum/3d/pb-de-resolution-graphique

You will find there how to adjust the performance of defining strokes

@+;-))

1 Like