Assembly BOM and welded constructions

3D Design Assembly
1

Hello

I have an assembly made up of several parts. These parts are made up of several welded construction elements.

Like what:

Assembly: Part A + Part B + Part C

Part A: 1 bar 2000mm + 3 bars 1500mm + 2 bars + 1000mm
Piece B: 7 x 500mm + 10 x 800mm bars
Parts C: 8 bars 1500mm + 4 bars 800mm

I want to have on a single sheet, a nomenclature of my welded parts that groups all the members of these 3 parts.

I hope I have been clear,
I'm on SW2017.

Have a nice day

2

Hello

I would say that by inserting the 3 pieces into a plan and generating the 3 welded parts list, it should do it.

Have a nice day

3

Hello

With this solution, one list A, one list B and one last C
The pieces, as in my example, measuring 800 in parts B and C
Will be in different lists.

I would rather have the possibility to merge these 3 lists of welded parts into one.

Is this possible?

4

Hello

You have to make a tabulated nomenclature with "detailed list of welded parts"
Personally I sort in "detailed numbering" which allows me to keep the sub-assemblies

Example
1
1.1
1.2
1.3
2
2.1

And if you don't want parts A-B and C to appear in the nomenclature, but just the bodies of the sub-assemblies do "decompose" on line A, B and C

Edit: You have to expand the parts bill to the left to have access to the right click/ Decompose (right click on the mechanically welded icon)
See image: 
https://ibb.co/kF73KU

1 Like