I created a stamping shape tool with its varying dimensions (so far so good).
I wanted to know if it was possible to configure the shape tool function to create my part family in the room?
I tried by first creating my part family and then inserting the tool. But I can just select the conf of the tool I'm going to use in the active conf of the room (wow, it's making knots in the brain, I hope you followed).
But then I can't configure the next shape tool in the part family (well there may be a trick but I missed it).
In fact I have to edit the tool function in the room, to choose which tool conf corresponds to the room conf. And by re-selecting the action face. And this on each conf piece.
@jfaradon: I use this tool. But you have to go and edit the shape tool function and finish with the active configuration because it can't be modified like that (i.e. choose a tool for a conf different from the active conf)
But then the choice is not accessible by the room family table. Unless there is an option to activate when creating the family....
@gt22: for the departed family table, I agree, it's where you have circled.
But I don't understand the rest of your answer (and yet it's not Friday! ;-) )
Do you have a shape tool table?
Otherwise, the default toolbar of the sheet metal already has the tool but it's called stamping tool (we're going around in circles since we're going back to one of your first remarks)
you must have in your configur the possibility to change this tool
In the Shape tool function you have a possibility to change the Shape tool
that you have created in your family of pieces
Replacing Shape Tools
After you insert a shape tool into a model, you can replace that shape tool with another one.
In cover.sldprt, in the FeatureManager authoring tree, right-click sample_louver1 and select Replace Shape Tool.
In the dialog box, navigate to dossier_d installation\Documents and Settings\All Users\Application Data\SolidWorks\SolidWorks 2012\design library\forming tools\embosses\extruded hole.sldprt and click Open.