Philosophy for the creation of a routing library

3D Design Volume Model
21

I'm in 2015 version.

 

The elbows and tubes are set up well, because the routing works.

If I create a routing in 6I, it works. If I create a WI route, it works. But if I want to transform a 6I routing into a WI, there is no update.

22

so in my opinion

The routing points are not the same as well as your connection points

according to your material properties

If they were identical nothing could prevent you from changing a 6L elbow into a WI for example

@+ ;-))

 

23

Indeed I am forced to have different connection points.

I took a screenshot of both rooms


6i.jpg
1 Like
24

and the wi


wi.jpg
1 Like
25

Question why do you have symmetries in the 2 elbows with hidden bosses?

so x routing points and connection

@+ ;-))

26

it's to draw my right part of the WI elbow.

1 Like
27

and your right parts are so long with this type of radius?

your story sounds quite weird ;-(

@+ ;-))

28

Yes, it's to allow orbital welding without adding material. C common in the pharmaceutical industry

 

http://www.tubes-technologies.com/Editor/assets/weldtron-catalogue-complet.pdf

1 Like
29

Well all you have to do is type a library of these types of products

No choice

but once done everything will go by itself 

Good luck

@+;-))

30

Here is the answer from the hotline, so it's a bug.

 

During our phone conversation, I told you that it is a bug referenced under the SPR number # 875277: "Edit route - Route Segment Properties - Bends - Elbows - Bend radius is wrong when the configuration is changed " to which you have been attached.
The workaround is to remove the existing bend and use the Edit Routing - Routing Segment Properties -> "Ask to Choose" option to change the bend configuration.