Hello
I need to write on an arc piece, but the fonts existing on windows are (it seems to me) all composed of splines.
When my subcontractor opens the dxf on his NC he only sees point clouds, he can't visualize the splines.
Do you know a font that is only composed of arcs, circles and lines?
Thank you
Kind regards
Gorka.
Hello
See here:
https://www.linotype.com/fr/3396/geometric-fonts.html
Or here:
http://www.fontspace.com/category/circles
But I don't know if it won't still be converted into a spline...
Hello
Thank you for your answer, I'll still wait to see if anyone has encountered the same problem as me and knows a font before trying them all.
Thank you anyway.
Have a nice day.
Hello
It's for cutting or marking??? Look at my carractere in my tutorial, for the marking I do a 0.1mm material removal and for the cutting a removal through everything. I've never had a problem with subcontractors
http://www.lynkoa.com/tutos/2d/caractere-pour-decoupe-laser
Hello, for engraving with a depth of a few tenths on an aluminum block on a machining center.
To get around this, I convert splines to polylines when exporting my part to dxf.
Thank you ac cobra 427 for your fonts, I will test them once installed (no admin rights).
Thank you Frédéric, maybe it's the solution I needed, I sent the dxf to the subcontractor to see what happens.
I'll keep you posted, thank you all for your contributions.
Have a nice day.
For me the solution to frederick and in short terms because if you have to take the DXF every time it's not great.
@ ac cobra 427, I don't take back my dxf, once the box is checked 'or unchecked I don't know anymore), the splines are transformed into polylines.
Dsl I thought you were re-opening the DXF to modify them...