Hello @ all,
When I make a detail view on SW2013, well my view is cut off (see attached file)... But it's only a problem of display on the screen, in print it comes out well.
Can someone help me?
I tried again to delete this one and make a new one... same results!!
Cdt
Eric
Do you have another workstation equipped with SW to test? in order to reproduce or not the problem.
If it's a display problem, have you checked if your graphics card drivers are up to date.
http://www.solidworks.fr/sw/support/videocardtesting.html
Hello
Does it do it over multiple shots?
If not, one way, update the graphics card driver.
Kind regards
same as the previous answers
see the driver certified Solidworks card so pro graphics card OPEN GL
@+ ;_)
The drivers are up to date...
No jmsavoyat, it does it on this one, and the one I copied from this one...
Have you tried to recharge your template in order to reset the base of your MEP???
Basemap reload...... always the same problem!!
If you make a new detail view but in a different place, or move the existing detail circle, the problem persists?
When I move my view, it appears "normal", and as soon as I zoom in at best, it starts again.
Yes it's the same, unless my detail remains at the "parent scale", as soon as I change it to ech 2:1, the problem comes back.
Hello
Have you tried to play with the display state of the detail view?
http://help.solidworks.com/2014/french/SolidWorks/sldworks/HIDD_DVE_DETAIL_CIRCLE.htm?id=80fb5a44d1d1412bbabb666c759dc16d#Pg0
Hello
Like Tomalan, it seems to me that the view display is of the "Shaded" type. I'm also thinking about the display settings of the parent view or the detail view.
Otherwise, I don't see.
Kind regards
Hello
Indeed, when I change the display style, it works!! but pkoi in shaded style the display is not done correctly?