Hello
When I open a heavy assembly solidworks rows a lot what to do thank you
Hello
it already depends on how your RAM station, graphics card is equipped... etc!!!
Hello
Check this out to see if it can help you
http://help.solidworks.com/2011/french/SolidWorks/SWHelp_List.html?id=7e44bc53d3e2470f98633c86ef44d3e8#Pg0
Hello
First of all, it's helpful to know what type of workstation you're using. If it's a laptop or a desktop computer. Then it is necessary that you compare your configuration with the one designed for SolidWorks as for example here: http://www.mycadstore.com/
Then as visible in the attachment you can perform a performance test of your pc and compare it on the forum.
Finally, it is necessary to know that SolidWorks breaks a lot of problems with large assemblies. We had already talked about it during this discussion: http://www.lynkoa.com/forum/solidworks/stabilite-sw-gros-assemblage?page=1#answer-99161.
To let us know a little more, can you post us your config? If you don't know the different features, use the CPUZ software: http://www.cpuid.com/softwares/cpu-z.html
Have a nice day...
capture.png
1 Like
Hello
If you're not ready to invest in a new station, there are a few things you can do:
- check that "complex assembly" is checked (it's automatic above 500 components by default): http://goo.gl/APmZPZ
- if your assembly contains sub-assemblies, use the Speedpak: http://goo.gl/1PtVQn
- use the "Manage large designs" feature: http://goo.gl/5nvElN
When I open a heavy assembly solidworks rows a lot what to do thank you
The two underlined parts are relative notions specific to each one, so it becomes very difficult to answer this type of question without more information.
The problem of "slowness" is in the vast majority of cases related to problems with the overall performance of the workstation or to unsuitable software settings.
Please provide us with details (assembly of how many parts, of what size, which station to use with which hardware configuration)
fthomas,
where do you find the size, the station
config wind 7
4pieces assembly
Thank you
? Amazing.............................. Is it a family PC?
Hello
Size 80000KB
4-piece assembly
Number of bodies 922
Nova141 if you want us to help you, you'll have to give us more precise information. Your question is already vast and we can't help you without detailed information.
Thank you.
See you...
rmorel;
When I open the assembly on solidworks.
Opening time 10mm
On the assembly there are 4 parts
for a room there are 620 volume bodies
because if I open it in light mode I can't modify the parts on the assembly.
Did you understand my problem this time.
Hello
Are these famous 620 volume bodies imported (iges step or other)?
If so, you probably need to "clean" the file in question.
@+
Hello Coyote,
The 620 volume bodies are not imported bodies, these are an imprint on the assembly
a+
Post a screenshot with the Creation Tree
for a better understanding
(a drawing is worth a thousand words)
@+ ;-)
Thank you all,
I open my assembly with speedpak.et its better
a++