Problem zooming at best on drawing

2D plans Layout
1

Hi all

I have a little problem with my zooming at best on a drawing,

when I click on this one its zoomed out to the maximum as if I had a hidden view, annotation or other (super) away from my worksheet off I checked and I am nothing of all its around,

on the other hand I realized that if I deleted my section view, it zooms in on my sheet,

Has this ever happened to anyone?

Thank you in advance for your answers,

Julian.

 

2

You may not see anything in your drawing but check in your 3D that you don't have a component like screws or other very far away. Sometimes drag and drop can play a few tricks.

 

Remi

3 Likes
3

Hello

Yes, we have already arrived at home, on our 2014 version...

But apart from redoing a view without a cross-sectional view, we haven't yet found the solution to this problem...

But since it wasn't a major problem for us we didn't make the request here on Lynkoa ;), but if anyone knows the answer I'm also interested:D

Steve

4

Hello

Since the 2015 version, there has been a zoom to the sheet to compensate for this.

 

 

Fred

5

Never had the problem but if this cut is unavoidable, to get around the problem, do a trimming of the view.

1 Like
6

Hello

Try to update to the latest version of SolidWorks, it may solve the problem (and others).

For SolidWorks 2013, 2014 and 2015 it is SP5. And 2016 SP2 in a few days.

 

7

Thank you for your answers,

For the trimming, it does not solve the problem,

On the other hand, on the 2015 version, if there is a zoom to the sheet it suits me because we have to switch to the 2015 version soon,

after if one person has the solution I think others will be interested,

and I'll try if by passing the MEP in 2015, if it solves the problem

Julian.

 

 

8

you say: "For the trimming, it does not solve the problem,"

Does this mean that despite cropping, the zoom continues to be too wide?

9

Yes that's it, the zoom is still super far away,

 

10

Hello

I'm in SW2015

Can you send your part and the drawing to check and that by converting it gets a positive result or if it comes from your part or drawing?

Have a nice day.

11

Sorry I didn't answer before,

 

For the problem, we switched to SW2016 this week in this version the plan that had the problem on the 2014 version continues on the 2016 so the best solution is the Zoom adjust the sheet,

Thank you for your participation and your help