rducrue
1
Hello
When creating a MEP, I make dimensions with a decimal point and save the file.
I open this same plan and automatically it adds 3 digits after the decimal point to all my quotations.
I then go to the properties of the document/dimensions and then in the "Zeros on the right" drop-down list I see "remove" (if I do OK no change).
I put on the drop-down list "standard" then I go back to "remove" then OK and the problem is solved.
I save again, and again when opening again.
I deleted the solidworks registry key and tried again, but after a day back to square one.
Thank you in advance for your help.
bart
2
And by going to System Options/ Odds Editing Options.
And in the Metric units box, put the number of 0s behind the desired decimal point or put nothing at all after the decimal point.
Or if not, in the property of the documents/quotes/Linear. In primary precision, choose .12 or .1 or .123 depending on the precision.
1 Like
rducrue
3
thank you for your answer but the problem is not related to the desired decimals after the decimal point;
But the amount of zero activated after the decimal point. I tried to change the parameters you stipulated for me, but to no avail.
gerald
4
Wouldn't there be a problem with the drawing model?
For my part, I will try to configure a drawing, save it as a model and replace the existing one that poses a problem.
rducrue
5
Document templates are used by 5 other people and to date only one person is experiencing this problem.
This problem did not exist before, we do not justify this change
Hello
If it only comes from one extension, reload the SW settings of one of the other extensions that has no problems.
You can do this through the Copy Settings Wizard (Start/All Programs/SolidWorks 20xx/SolidWorks Tools/Copy Settings Help)
No recent update and I have already made a parameter copy but
doesn't work. Sniff
Hello gentlemen
Deleting the DLL, was not enough so uninstall and reinstall
thank you anyway