Property sheet metal drawing view

2D plans Annotation
1

Hello

As I don't do sheet metal work very much, I come up against a problem that is probably very simple. I have a problem in activating some properties of the drawing views. Why are some of them inactive, especially the display of bend notes?

I should point out that I made two different designs, either directly with the sheet metal module, or with a classic solid design that was then converted into sheet metal. Both lead me to the same annoyance.

I am attaching a small explanatory document to be clearer.

Thank you and have a good day


pb_mise_en_plan_tolerie.pdf
2

Hello

When you click on the unfolded view and go to the tree on the left, there should also be options that you can enable or not. 

3

This is what I did and I explain it in the attached document. The options are grayed out, so they are inactive. I can see the line "show folding notes" which is not checked but it is not accessible. That's where my problem lies.

4

I have this problem when there is an unfold in the room, insert==>sheet metal then unfolded and there in this configuration we have no  access. Otherwise you have already restarted your station??