As in the tytre I am looking for a very specific channel
Do you have catalogs or reference for the types of roller chains
I had it in my hands thin as a chainsaw chain with a lug sticking out at 45° outside
and no picture to show I'm a donkey ;-(
Thank you
@+
I just ate the Sedis catalog and bhin no it's not there ;-(
It looks like this but
- finer
- smaller
- the cleat is bent at 45°
- does not have a 45° cut
@+
Hi gt22,
Why not draw the two links and make a repeat or use the one in the link below and modify as you need to???
Here are some channel download links for the beginning:
http://www.tracepartsonline.net/(S(e1upeirpucrcqmpcwvej4ew5))/content.aspx? SKeywords=chain+a+roll&SDomain=3&st=4&sa=0&Class=TRACEPARTS&clsid=%2FTRACEPARTS%2F&ttl=Classification+TraceParts
I think you should find your happiness...
Hi @ ac Cobra
The problem is not to draw it
if necessary I will do it once the piece is in hand
I wanted to find as much as possible the good refs of this type of channel
I had also visualized trace part but that dal corresponded to my visual memory
thank you for your answer
@+ ;-)
OK, did you by any chance look on the links if you find a reference??? Maybe it's silly, my we don't always think about it...
The problem is that I quickly caught a glimpse of this chain
so I couldn't see if there were any refs on it
it's anticipation of a future market where I'll have to if it's OK
Design or find the technique of a 120° angle gearbox in a minimum of space
instead of the exciting one which is at 90°
So also modifying the envelope by remaining as faithful as possible to what exists
@+ ;-)
Bug, it's going to be sport without photos and references...
no no the refs I'll have them well in hand don't worry
otherwise not possible to do something viable
I just wanted to try to anticipate a little.............. ;-)
@+ ;-)
Ah OK, well I think you don't have much choice but to wait until you have the references...
Hello
And why not model it, make a plan and make a request to several suppliers to find out if they can have this model?
thank you @ leblanc it will be done once the product is in hand
you will have read the whole thread you will have understood it seems to me
@+ ;-)
Hello
Does the channel look like this:
http://www.kettenwulf.com/fr/eventail-de-prestations/produits/chaines-de-manutention.html
S.B
Hi SB thank you
I had also seen this model too it is close in size
The difference is that the cleat or lug
is folded 45° inwards as shown in the attached photo
and only on 1 side of the chain
more or less if I'm not mistaken
I think that the purpose of this chain is to make a transfer of energy and that the cleat or lug should allow to move a cam a finger?
well I'm not sure maybe I'm extrapolating
@+ ;-)