When retrieving the step of a client, SD tells me a problem on one side of the one ci.la side intersects what is the best solution for repairing it.
thank you in advance
Have you made a diagnosis on your volume?
Normally, after importing, SW offers a volume diagnosis and to repair geometry errors if there are any.
Otherwise, right-clicking on your body imported into the tree gives you access to this function.
3 Likes
yes the import diagnosis gives me 3 defective faces.a right click allows me to repair 2 but not the 3
1 Like
Did you use "repair faces", "repair discontinuities" or "repair everything"?
When it happens to me, I make several successive attempts with repairing everything and then the other options successively but it doesn't always work.
If you still have a problem, try posting a picture of the problem.
The surface experts will be able to tell you better how to repair
2 Likes
Ok thank you
I think the problem comes from the twin holes
also try to repair discontinuities by changing the dimension tolerance parameters
All blue lines indicate a non-continuity of face
attempts to suppress the face and recreate it
See this tutorial among others
http://www.lynkoa.com/tutos/3d/la-fonction-permettant-de-supprimer-la-face-dans-solidworks
@+ ;-)
2 Likes
Hello
indeed it probably comes from the countersunk holes that are too close to each other, would you have the possibility to add 0.05 mm (or even less) of surface between the Ø of holes?
2 Likes
Hello
These are zero thicknesses. reduce the diameter by 0.001 to solve the problem or better create an opening because you will hear screaming when you are going to give this to be machined...!
ouverture.jpg
1 Like
@ ste it's good to put me in a better answer
but I would also have liked to know how you solved your problem
thank you for precision if possible
@+ ;-)
sorry problem not solved despite your excellent tutorials
Post your step
2 Likes
sorry but it's not possible
thank you for your help
1 Like
your face can you suppress it or not?
Yes I can, on the other hand, by transforming my file into IGS and going back to SD, no more problem
1 Like
ok next time try to have your files if possible in parasolid
This is the core of Solidworks
have a nice day @+ ;-)
1 Like
Hello
otherwise fill the holes, record in step, open and redo the holes.
may the force be with you.
1 Like
Thank you all
1 Like