Hello Stephane_WEY,
Well yes it's possible to generate the mass of the welded parts... (It's my tutorial 
)=>https://mycad.visiativ.com/contenu/ajout-la-masse-pour-chaque-corps-dun-mécanosoudé-dans-sa-liste-de-piéces-soudées-sur-sw2022-?tuto
@+.
AR
1 Like
Thank you for this document.
Yes, I knew that you can display masses in the nomenclature.
What I explained is a little bit different: if you do a detail drawing of one of the bodies welded into a single page, then you can't retrieve the mass of the body alone automatically.
SW does not retrieve the body mass parameter. The workaround is to create a note that you attach to the body and you can retrieve the mass info.
Or, and this is what we do, I hide the mass line of the cartridges of the detailed bodies and I add the mass line in the list of welded bodies on my first page of the plan.
1 Like
Hello !! Stephane_Wey,
Well for us it works with SW2022SP4=>
???
@+.
AR.
1 Like
OK. I'm going to take a closer look at that.
But we detail the bodies on separate pages. In your case, I understand that you detail the bodies on your overview page in which there is the list of welded parts.
In any case, thank you for your sharing.
1 Like
Otherwise, if you have mycadtools, the CuttingOptimisation application outputs the breakdown of the throughput rate by piece, in addition to the setting up and the calculation of the need
1 Like