Here are my typts files
room and mep, if someone can look and tell me what I forgot to do.
THANK YOU
modeles.zip
modeles.zip
7 Likes
The text values you need to enter: Draftsman, supplier code, etc. are all empty and therefore worthless.
That's why your rating doesn't work.
These elements must be filled in. First of all, try to fill them in without going through Smart Properties to avoid problems with the configuration of the latter. Type a text in this value using the part properties.
If it works, make it happen with Smart Properties.
Kind regards.
capture.png
This is what I said in my 1st and 2nd message:
As I saw on your image, the fields are not filled!
1 Like
sorry I can't watch, I'm in 2012 version
rmorel and Lucas Prieur, as I told you, these are "type - .prtdot" files so empty at creation, but there is only the machinetotal property that is not displayed in the cartridge, otherwise all the others are displayed.
7 Likes
I just uploaded your files, and I see that these are your templates.
I was asking you for an example of a piece with its plan that should work!
I just did the test (in 2014 since the models are in 2014) just now with your models.
In your basemap there is no note that retrieves your "MachineTotal" property
If I create a note related to the "MachineTotal" property and insert a part from your part model or I manually filled in the Total Machine property, there is no problem, I get the value of the property back.
3 Likes
I create a new drawing from your DRWDOT model and I insert inside a part made with your part model in which I have previously filled in the "MachineTotal" property
I edit the basemap,
I put a note wherever I want in the cartouche,
Then I click on linked to the property
Then I select "Template in Specify view in Sheet Property"
In the drop-down menu I select MachineTotal and I validate.
To finish you just have to resave the basemap so that my changes are taken into account for all the new drawings
4 Likes
I indicated the procedure in my 1st message (you have to do it in the template for it to work on all levels):
Then in the drawing, by right-clicking in the sheet but outside of an "Edit background" view.
When you leave the mouse on the place where you want the code to be displayed, it should be written $PRPSheet:"code".
If not, double-click to edit.
If you want to apply this to all old plans, you'll need to use the Integration utility.
I may have forgotten to tell you that the property is the result of a condition in smartprop.
image_1.png
7 Likes
It doesn't change anything, whether it's a result or not.
As long as you check that after validating the SmartProp, you have the desired value for the "TotalMachine" property in the "Document Property" window.
If in the value column, you have the info you're looking for, all you have to do is do what was said before: $PRPSheet:"TotalMachine"
But if you don't have anything displayed, as you say, it may come from your formula in the SmartProperties which is not good... So check the result in the properties before handling the link.
I do have the property in the room but I can't get it displayed in the MEP
7 Likes
Hello
As I've already said several times, it would be easier if we had a file. If it's for privacy issues, take an existing file where it should work and remove all the functions except the first one.
Otherwise, simply if the property is correctly populated in the 3D (not empty), in "> files", in the "custom" tab and not "configuration specific" (it's a SmartProperties setting too), then if in your layout you have followed the different ways to display a custom property (mine or fthomes'), There's no reason why it shouldn't work!
And remember to do the manipulation on your "dot" files, then use integration to update all your files, if you want it to appear on your old plans too.
Hello
And thank you for answering again.
Here is a room and an MEP, however I don't know why I managed to put the property in the MEP but it still doesn't show up when I insert the part in it.
See attachments.
desktop.zip
7 Likes
There is a problem with the name of your property.
By changing the name to MT for example, and creating a note as shown in the attached image, it works, and I was able to display the total machine...
But by leaving the property with the name "MachineTotal" it remained empty indeed...
machine_total.jpg
Personally it works perfectly without changing anything ... provided you fill in the "MachineTotal" property since currently in the example room you provided the property is empty!
After I don't know in which version everyone does these tests, currently I test on a 2014 SP0.0, if lucas and m.angers you test on SP1.0 and a problem appears I want to do the test again in this version if you want.
2 Likes
I tested SP1 in 2014 indeed.
Ok, does it work parafitment!! by simply changing the name of the property, it is incomprehensible.
Thank you.
PS I'm in 2014 SP1
8 Likes