Regeneration in medium dimensions

[f.schmitz]

Hello
Is it possible to regenerate a model in medium dimensions (in the case of non-symmetric tolerances) before generating a WWTP or a dxf in order to aim for the tolerance medium during the realization?
Or another method?
Kind regards
Frank

[A.R]

Hello Frank;

I don't know if it's possible, but in your case I'll save the model in config, for example in medium dimension as you want before generating your STEP.
If there is another solution I am taker.
@+.
AR.

[sbadenis]

If you have the Visiativ tools, Tolerance allows you to do it simply:

Tolerances

And indeed as @AR says, it's a config that is automatically generated.
To install the trial version:
https://mycad.visiativ.com/download-mycadtools
Otherwise via macro this one at codestack (not tested but reliable site):

SOLIDWORKS macro to create configuration with average dimension values

Finally this subject still via macro (not tested):

3DSwym

For us, the 1st solution works perfectly as we have access to the Visiativ tools which we use for many other things as well.
Edit: a topic here that is a bit old but still valid:

Creating 3D to Inserted

Here is an example, for easy use I put the tolerances in my sketch (which then allows me to retrieve them in my MEP) I launch the utility, I click on the calculation tab, on create a derived configuration, then on average and there it creates the configuration derived from my part with the average dimensions. [image]   Edit: For the part with tolerance you click on all this you import all the coasts then you choose the tolerance in the application of tolerances part. (but...