Rename a solidworks file with an epdm counter

ypetit · January 23, 2017, 10:59am

Hello

Is it possible to rename files created outside the epdm system, by a DET type prefix plus an EPDM counter?

thank you for your answer

ac_cobra_427 · January 23, 2017, 5:10pm

Hello

If this part is in multiple assemblies or if it has a drawing, you can right-click and rename with Solidworks and for the MEP you can rename via windows and if it's just one part you can just rename to windows.

ac_cobra_427 · January 23, 2017, 5:23pm

Oops DSL I hadn't seen that you also had to add an EPDM meter... :-(

Cyril_f · January 24, 2017, 10:31am

Hello

Unless I'm mistaken, with the dispatch functions you can do this action.

d.roger · January 24, 2017, 1:49pm

Hello

I confirm what Cyril.f says, this is possible with the Dispatch functions, you must of course have administrative rights on EPDM. The "Dispatch" chapter of the EPDM Administration Help describes the procedure quite well.

Kind regards

ypetit · January 26, 2017, 6:45am

Hello Cyril.f,

I'll have to try it out.

Thanks for the info.

CDLT

ypetit · February 3, 2017, 10:27am

With project manager tool from mycadtools, it is possible to deal with my problem.

When I have more time I will deepen the Dispatch function

Thank you for your help