Drilling table (renumbering)

[stefbeno]

Hello
A colleague has a problem with the drilling tables.
The table is generated by selecting the face, the idea being that the holes that will be added later automatically appear in the table.
On the other hand, because of this selection, openings are also taken into account when we do not want them to appear.
So we delete these rows at the table level.

The problem is when you add holes, the numbering is not continuous (in the example, you go from M to W).

The easy solution is to renumber the table but you lose other modifications (the descriptions of the holes).
Do you know how to change the letter of the next coordinate system that will be used?
or how to modify the letter used (the W in our example so that it becomes N) a posteriori?

[sbadenis]

Has he tried renumbering?
https://help.solidworks.com/2021/french/solidworks/sldworks/c_hole_table_tags.htm
Edit: What options for the table?

[A_R]

Hello Stefbeno,

You have to do it like in Excell, you select the lines you don't want and you simply delete the line.
And to Modify the Letter, you have to click your table and you go to your left pane, you change your letter or your number, and you close your left view and that's the work. On the other hand, it takes the starting order e.g. "A", and here is my solution.
Good luck.
@+.
AR.

[Lynkoa15]

The manual numbering works, interesting novelty of the 21, thanks for the tip,

[stefbeno]

These are very interesting things.
I pass it on to my colleague so that he can test.