Hello
I am asking for your help in the creation of a scoreboard for milling shapes.
With the drilling table, the centers of the spokes are not recognized...
Do you know how it is possible to do this?
Thanks in advance!
Hello Loic_R,
To make a painting as you want it's possible, but I can't take a screenshot because my PC (SW2022SP4) is being processed. It works well for holes, for milling I'm not sure.
Then you go to insert "drilling table, you follow the instructions, your board appears with many options, you'll see.
Here is a link=>https://help.solidworks.com/2022/French/SolidWorks/sldworks/t_create_hole_table.htm
And that =>https://help.solidworks.com/2022/French/SolidWorks/sldworks/c_example_using_hole_tables.htm?id=54b79feb53c54f87a74eae54ffdd2470#Pg0
Keep us informed, @+.
AR.
1 Like
Thank you for your answer.
Indeed I manage to get this type of table
But the oblong is only defined by the Ø C1 but there is no position of the other Ø
1 Like
I think that in order for the " oblongs " to be identifiable in the drilling table, they should be done the old-fashioned way in 3D
=> Two separate holes and a milling cutter (removal of rectangular material) between the two...
1 Like
That's what I thought too but I wanted to avoid.
So I'm going to start this way again.
Thank you for your help.
Loïc
It is also possible to add holes manually to an existing table:
https://help.solidworks.com/2021/french/SolidWorks/sldworks/t_add_holes.htm?id=01ce22b73d164588b44a17029df61f5f#Pg0
It's up to you to choose which is the least worst solution... 
1 Like
Otherwise by taking the function in the toolbox:
The size of the light is indicated
2 Likes
Well done @sbadenis :
But be careful, only the center of the groove is dimensioned...
And beware of the " Creation Diagram" mode of the groove, the dimension of the arc center / Arc center can be confusing in the drilling table...
1 Like