Sheet metal bent in the shape of a propeller

Out of category
56

It is not a sheet metal part, so it is impossible to make sheet metal. I don't think the sheet metal module is capable of handling a simple helical surface by the way.

Must:

- draw it on the surface and thicken the surface

or

-draw the part in 3D on one side and then refine the part by removing material until 'shifting the surface', using a shell function, removing material with an offset surface..

 

The result will be the 3D of the desired part. Then it's up to the stamper to deal with it (it's his job after all...)

1 Like
57

There is no real solution!

The solution would be by stamping

But solid does not have the stamping module to make this part

THANK YOU

58

But solid does not have the stamping module to make this part

This is obsolutely false 

You just have to create your own tool and then you can create your stamping

so I put -1 on the answer that you validated as best

See this tutorial among others

https://www.youtube.com/watch?v=SHNIm0X6Txk

@+

2 Likes
59

GT22

I had already tried this solution but on my puck it doesn't work

but if you succeed, I'm a taker...

60

give me the dimensions of your washer STP

and I look at it right away

2 Likes
61

There is no problem, there are only solutions!! +1 shape tool, just create the shape you want and save it in .sldftp format.

62

GT22

Thank you

I join the part in step


spire_tole_pliee.step
63

Solidworks 2015 part


tole_pliee_helice.sldprt
64

Hello

Yes it exists, look at page 5 I had put you an image of the stamping function, there is the tool by transparing and the stamped plate.

1 Like
65

Here is your form tool so you can handle the problem now

via the tutorial posted on one of my  previous answers

attached file SW 2012

@+ ;-)


david_heyraud_rondelle_spirale_forme.sldprt
3 Likes
66

Thank you GT22

I created a split washer, inserted and then positioned your tool, but when I validate the stamping is not done and my shaft is red..?

67

Have you registered my part as a stamped shape tool part

Watch the video posted previously

or this

http://www.lynkoa.com/tutos/3d/outil-de-forme

@+

68

yes I saved it as a shape tool

no pb for the isertion in my part

69

can you show via a screen the defs of the stamping function (creation tree)

the faces taken into account etc

70

Here's a word


pd_emboutissage.doc
71

you can't insert an image on the com feed it's + simple and smoothable

you need the part but also the settings on the function so open the function and show us it please

@+

72

73

74

75